The exterior reference is for designing your own accessories around the real shape of the BLOWZER X6. Download it from the MODS library: https://community.getblowzer.com/mods/reference
What is in it
- Two one-piece body solids: with the stock flat nozzle (92.27 × 40.0 × 149.21 mm) and with the bare socket (64.17 × 40.0 × 149.21 mm), as STL.
- The five nozzles as exact CAD (STEP) and as meshes (STL): flat short (stock), flat, long, wide, needle.
- A kit file (3MF) with the bare body and the five nozzles as separate named parts in their mounted positions.
- Units are millimetres.
- The nozzle socket and the rear intake grille keep their real open geometry, so you can design nozzles and adapters against them.
What is not in it, on purpose
- No internal part: no motor, impeller, circuit boards, battery, LEDs, wiring or inner liner.
- Not the factory housing CAD, which would allow reproducing the housing.
How we checked
Every mesh was re-read from the published files: each one is watertight with exactly one shell, so nothing exists inside the outer skin except solid fill. The kit lists exactly six objects: the body and five nozzles. Dimensions were compared with the original CAD parts.
Questions about fits or dimensions? Ask here.