In 3D
Belt Holster C — Clip-On
Concept: the snap clip's jaws on a belt clip — pull up by the barrel to draw.
- Fits
- BLOWZER X6 (TF-BZX6)
- Version
- 2
- Credit
- Designed by BLOWZER
Test status
Fit-checked digitally
Fit check in Blender: snap bumps preload the grip only (same jaws as the snap clip). Concept only — not printed, not worn.
Downloads
blowzer-x6-belt-holster-c-clip-on-v2.stl STL — mesh, ready to slice · 89 KB blowzer-x6-belt-holster-c-clip-on-v2.step STEP — CAD, for designing · 1.1 MBDigital DIY files. Printed parts are not included in the retail BLOWZER box; you print and use them at your own discretion.
How to use it
Snap-clip jaws grab the grip and a shelf supports the grip cap; a hooked clip rides a 50 mm belt. The X6 hangs vertically with low leverage. Draw: pull up by the barrel. Concept — never printed or worn.
Print settings
- Print orientation
- shelf underside on the bed, jaws pointing up
- Material
- PETG
- Supports
- none
- Layer height
- 0.2 mm
- Nozzle
- 0.4 mm
- Walls
- 3
- Infill
- 25–30 %
- Scale
- 100 % — do not scale, the grip pocket stops fitting
- Extra hardware
- Not specified
- Size (as printed)
- 70 × 44.5 × 90 mm
- Filament
- ≈ 42 g PLA at 30 % infill
- Assembly
- Not specified
- Notes
- 4 walls so the jaws survive repeated flexing.
Reuse terms
BLOWZER X6 Reference Model Licence (v1.1, 2026-10-02) Copyright (c) 2026 Sabrent. "BLOWZER" and "SABRENT" are trademarks of their owners. You may, free of charge, for personal AND commercial purposes: 1. Use, copy, measure and modify these reference files to design, test, make and SELL accessories, mounts, docks, holders, cases, adapters and similar add-ons that fit or work with the BLOWZER X6. 2. Include these files, unchanged or modified, in the published source of such an accessory, with this notice. You may NOT: 3. Use these files to reproduce, manufacture or sell the BLOWZER X6 product itself or a product that copies its housing, or imply that your accessory is made or endorsed by Sabrent. 4. Remove the BLOWZER / SABRENT marks from the model and present the result as a different product. The files are provided "as is", without warranty of any kind. Dimensions are taken from the factory CAD and the printed solid is a voxel reconstruction (see README) — verify critical fits against a real unit.
Version history
- v2 Sep 17, 2026 recessed wordmark on the plate
- v1 Sep 17, 2026 concept build
Discussion
0 replies · 0 printed →Questions, fit reports and print logs live in the forum thread. Printed it? Post an "I printed this" reply there.