Desk Dock with Nozzles
DDK01Desk dock for the BLOWZER X6: it stands in a sleeve on your own USB-C cable, clicked into a lock under it, with four nozzle seats.
- Fits
- BLOWZER X6 (TF-BZX6)
- Version
- 11
- Credit
- Designed by BLOWZER
Test status
Tested by BLOWZER
Owner print, Oct 18, 2026, on a Bambu Lab X2D in PETG HF. Owner verification: "UPS01 v4, CMN01 v7 and DDK01 v9 are all printed, verified and should be on the website published on mods." v11 changes only the engraving: the model number moved from the top of the base to the underside (owner ask, Nov 13, 2026); v10 (Oct 18, 2026) carried the nozzle seats exactly as the approved parts-kit seat. Both checked digitally against the approved parts (cad-check, Nov 13, 2026); not yet re-printed.
Digital DIY files. Printed parts are not included in the retail BLOWZER box; you print and use them at your own discretion.
Model files
All model files (6.8 MB)-
Desk dock
stl DDK01-v11-desk-dock.stl 1.3 MB | Nov 13, 2026
How to use it
A desk home for the BLOWZER X6 that keeps it standing, charging and next to its spare nozzles. The X6 drops grip-down into the sleeve and lands on your own USB-C plug, which sits clicked into a lock under the sleeve, so it charges the moment it is set down. Four twist-lock seats beside the sleeve hold the spare nozzles. Feed the plug up through the opening under the base, slide it along until it clicks, then press the cord into a groove so it leaves the dock front, back, left or right. v9 is the version the owner printed and verified: it reuses the cable lock of the approved Under-Desk Slide Dock with the plug loading from below, on a 190 × 100 mm base with no screws or glue.
Print settings
- Material
- PETG (owner print, PETG HF)
- Supports
- none
- Layer height
- 0.2
- Infill
- 20 %
- Size (as printed)
- 190 × 100 × 75 mm
Your printer's ready-made 3MF file has all of this.
More details
- Print orientation
- base down, as saved
- Walls
- 3
- Nozzle
- 0.4
- Scale
- 100 % — do not scale, the sleeve, the cable lock and the nozzle seats stop fitting
- Extra hardware
- Your own USB-C charging cable (not included)
- Assembly
- One part, no hardware. Plug in from below, click, route the cord into a groove, drop the X6 in, twist the spare nozzles into the seats.
- Filament
- 146 g PETG
- Notes
- Owner print of v9 on a Bambu Lab X2D, 0.4 mm nozzle, PETG HF, base down, no supports, no brim: 3 h 35 min, 146 g; the v11 slice reads 3 h 31 min, 146 g on the X2D and 3 h 29 min on the X1 Carbon. The X2D and X1C project files (3MF) carry these exact settings. Bambu Studio may show a non-critical "floating cantilever" note for a thin ledge inside the plug opening; it printed fine in the owner print. The model number is engraved on the underside and prints as recessed letters in the first layers.
Licence
Free for personal and commercial accessories, not for copying the product.
Full licence text
BLOWZER X6 Reference Model Licence (v1.1, 2026-10-02) Copyright (c) 2026 Sabrent. "BLOWZER" and "SABRENT" are trademarks of their owners. You may, free of charge, for personal AND commercial purposes: 1. Use, copy, measure and modify these reference files to design, test, make and SELL accessories, mounts, docks, holders, cases, adapters and similar add-ons that fit or work with the BLOWZER X6. 2. Include these files, unchanged or modified, in the published source of such an accessory, with this notice. You may NOT: 3. Use these files to reproduce, manufacture or sell the BLOWZER X6 product itself or a product that copies its housing, or imply that your accessory is made or endorsed by Sabrent. 4. Remove the BLOWZER / SABRENT marks from the model and present the result as a different product. The files are provided "as is", without warranty of any kind. Dimensions are taken from the factory CAD and the printed solid is a voxel reconstruction (see README) — verify critical fits against a real unit.
Version history
- v11 Nov 13, 2026 the model number engraving moved from the top of the base to the underside, reading from below; no other change (owner ask)
- v9 Oct 19, 2026 first public version of the dock: the cable lock of the Under-Desk Slide Dock with the plug loading from below, four nozzle seats; owner test print in PETG on a Bambu Lab X2D; v1–v8 were internal
- v8 Oct 15, 2026 From Nachumi's v7 v3 print: 3 cable channels to top/left/right, dead-end slot filled, lock = UDH01 v5 final (plug drops in from the top, slides back, clicks). X2D PETG HF 3h33, 145.6 g. CAD-codex PASS.
- v7 Oct 11, 2026 v7-charging-dock-PROPOSAL
- v6 Oct 6, 2026 cup walls removed (Meni): flat 3 mm seat over the bore + lugs, 181.6 cm³ / ~124 g (v4 221.7 / ~151 g); same footprint, pocket, charge slot and logo (pack v1.3)
- v3 Sep 17, 2026 recessed BLOWzer X6 wordmark (0.6 mm) on the top face
- v2 Sep 17, 2026 fit-checked rebuild: grip pocket 0.6 mm clearance, 4 nozzle cups Ø41.2, charge-through slot + cable channel
- v1 Sep 16, 2026 first SolidWorks build
Discussion
0 replies →Makes
No prints shared yet.
Questions and fit reports live in the forum thread.