Desk Dock Direct USB
DDU01Free-standing desk dock for the BLOWZER X6: the X6 stands in a sleeve on your own USB-C cable, which clicks into a lock under it, with four twist-lock seats for the spare nozzles.
- Fits
- BLOWZER X6 (TF-BZX6)
- Version
- 3
- Credit
- Designed by BLOWZER
Test status
Tested by BLOWZER
Printed and tested by the BLOWZER team on a Bambu Lab X2D in PLA (Oct 2026).
Digital DIY files. Printed parts are not included in the retail BLOWZER box; you print and use them at your own discretion.
Model files
All model files (9.0 MB)-
Desk dock
stl DDU01-v3-desk-dock.stl 1.2 MB | Oct 17, 2026
How to use it
Feed the USB-C plug of your own cable up through the opening under the dock, slide it toward the centre until it clicks into the lock, then press the cord into any of the four grooves in the base so it leaves the dock front, back, left or right. Lower the X6 into the sleeve and it lands on the plug and charges. Four spare nozzles twist into the seats around the sleeve; the fifth nozzle can stay on the X6.
Print settings
- Material
- PLA (team test print, black)
- Supports
- none
- Layer height
- 0.2
- Infill
- 50 % with a solid 8 mm base (41 bottom layers)
- Size (as printed)
- 92 × 133 × 70 mm
Your printer's ready-made 3MF file has all of this.
More details
- Print orientation
- base down, as saved
- Walls
- 3
- Nozzle
- 0.4
- Scale
- 100 % — do not scale, the sleeve, the cable lock and the nozzle seats stop fitting
- Extra hardware
- Your own USB-C charging cable (not included)
- Assembly
- One part, no hardware. Plug in from below, click, route the cord into a groove, drop the X6 in.
- Filament
- 161 g PLA
- Notes
- Team test print on a Bambu Lab X2D, 0.4 mm nozzle, black PLA, base down, no supports, no brim: 4 h 25 min, 161 g. The X2D project file (3MF) carries these exact settings. Bambu Studio may show a non-critical "floating cantilever" note for the two small click teeth inside the cable lock; they print fine in PLA.
Licence
Free for personal and commercial accessories, not for copying the product.
Full licence text
BLOWZER X6 Reference Model Licence (v1.1, 2026-10-02) Copyright (c) 2026 Sabrent. "BLOWZER" and "SABRENT" are trademarks of their owners. You may, free of charge, for personal AND commercial purposes: 1. Use, copy, measure and modify these reference files to design, test, make and SELL accessories, mounts, docks, holders, cases, adapters and similar add-ons that fit or work with the BLOWZER X6. 2. Include these files, unchanged or modified, in the published source of such an accessory, with this notice. You may NOT: 3. Use these files to reproduce, manufacture or sell the BLOWZER X6 product itself or a product that copies its housing, or imply that your accessory is made or endorsed by Sabrent. 4. Remove the BLOWZER / SABRENT marks from the model and present the result as a different product. The files are provided "as is", without warranty of any kind. Dimensions are taken from the factory CAD and the printed solid is a voxel reconstruction (see README) — verify critical fits against a real unit.
Version history
- v3 Oct 16, 2026 first public version: straight threading shaft under the cable lock, wider 5.6 mm cable grooves, solid base; owner test print in black PLA on a Bambu Lab X2D; earlier rounds v1–v2 were internal
Discussion
1 reply →Makes
1 shared · 0 fitMy BLOWZER X6 on the Desk Dock Direct USB at my barber station. It stands right next to my clippers, charges on the USB-C lock and keeps the spare nozzles in t…
Questions and fit reports live in the forum thread.