In 3D
Magnet Puck
Round screwless dock that sticks to any steel surface with six magnets.
- Fits
- BLOWZER X6 (TF-BZX6)
- Version
- 1
- Credit
- Designed by BLOWZER
Test status
Fit-checked digitally
Fit check in Blender: grip clears the pocket by 0.57–0.78 mm, barrel stops 4 mm short of the steel. Holding force is a calculation, not a measurement. Not test-printed as far as the record shows.
Downloads
blowzer-x6-magnet-puck-v1.stl STL — mesh, ready to slice · 203 KB blowzer-x6-magnet-puck-v1.step STEP — CAD, for designing · 1.1 MBDigital DIY files. Printed parts are not included in the retail BLOWZER box; you print and use them at your own discretion.
How to use it
An Ø80 disc with six magnet pockets on the back and the grip pocket on the front: stick it to a PC case side panel, a toolbox, a workbench leg or a car tailgate. Charges while docked through the usual slot and cable channel. Six N42 discs give roughly 6 kg of pull on thick steel against a 0.3 kg product.
Print settings
- Print orientation
- round back plate on the bed, magnet side down
- Material
- PLA
- Supports
- none — the pocket's inner face prints as a 52 mm bridge, turn bridging on
- Layer height
- 0.2 mm
- Nozzle
- 0.4 mm
- Walls
- 3
- Infill
- 25–30 %
- Scale
- 100 % — do not scale, the grip pocket stops fitting
- Extra hardware
- 6 × neodymium disc magnets Ø8 × 3 mm (N42)
- Size (as printed)
- 80 × 79.99 × 42 mm
- Filament
- ≈ 38 g PLA at 30 % infill
- Assembly
- Not specified
- Notes
- Drop the magnets into the Ø8.2 × 3.2 pockets on the back and fix with a drop of superglue; they sit flush against the steel.
Reuse terms
BLOWZER X6 Reference Model Licence (v1.1, 2026-10-02) Copyright (c) 2026 Sabrent. "BLOWZER" and "SABRENT" are trademarks of their owners. You may, free of charge, for personal AND commercial purposes: 1. Use, copy, measure and modify these reference files to design, test, make and SELL accessories, mounts, docks, holders, cases, adapters and similar add-ons that fit or work with the BLOWZER X6. 2. Include these files, unchanged or modified, in the published source of such an accessory, with this notice. You may NOT: 3. Use these files to reproduce, manufacture or sell the BLOWZER X6 product itself or a product that copies its housing, or imply that your accessory is made or endorsed by Sabrent. 4. Remove the BLOWZER / SABRENT marks from the model and present the result as a different product. The files are provided "as is", without warranty of any kind. Dimensions are taken from the factory CAD and the printed solid is a voxel reconstruction (see README) — verify critical fits against a real unit.
Version history
- v1 Sep 17, 2026 first build, logo recessed on the plate below the pocket
Discussion
0 replies · 0 printed →Questions, fit reports and print logs live in the forum thread. Printed it? Post an "I printed this" reply there.