Designed by BLOWZER Desk

Under-Desk Slide Dock

UDH01

Test-printed two-piece under-desk dock for the BLOWZER X6: a screw-on rail with four twist-lock nozzle seats and a slide-on sleeve that holds the X6.

Fits
BLOWZER X6 (TF-BZX6)
Version
5
Credit
Designed by BLOWZER

Test status

Tested by BLOWZER

Owner print, Oct 14, 2026, on a Bambu Lab X2D in PLA: "printed! amazing, ready to publish."

Model files 9 files · 8.8 MB

Digital DIY files. Printed parts are not included in the retail BLOWZER box; you print and use them at your own discretion.

Model files

All model files (8.8 MB)
  • One plate print

    stl UDH01-one-plate-print.stl 938 KB | Oct 21, 2026

  • Sleeve print

    stl UDH01-sleeve-print.stl 420 KB | Oct 21, 2026

  • Rail print

    stl UDH01-rail-print.stl 517 KB | Oct 21, 2026

How to use it

Screw the sleeve and the rail under any wood, MDF or laminate desk. The rail's dovetail slides into the groove under the sleeve's hood until the hook clicks over the keeper tooth; press the thumb pad and slide the rail out to take it off. The X6 slides into the sleeve cap-first and charges with its USB-C cable parked. Four spare nozzles twist into the seats along the rail's front row and come out straight down, without moving the X6 or another nozzle. The fifth nozzle can stay on the X6.

Licence

Free for personal and commercial accessories, not for copying the product.

Full licence text

BLOWZER X6 Reference Model Licence (v1.1, 2026-10-02) Copyright (c) 2026 Sabrent. "BLOWZER" and "SABRENT" are trademarks of their owners. You may, free of charge, for personal AND commercial purposes: 1. Use, copy, measure and modify these reference files to design, test, make and SELL accessories, mounts, docks, holders, cases, adapters and similar add-ons that fit or work with the BLOWZER X6. 2. Include these files, unchanged or modified, in the published source of such an accessory, with this notice. You may NOT: 3. Use these files to reproduce, manufacture or sell the BLOWZER X6 product itself or a product that copies its housing, or imply that your accessory is made or endorsed by Sabrent. 4. Remove the BLOWZER / SABRENT marks from the model and present the result as a different product. The files are provided "as is", without warranty of any kind. Dimensions are taken from the factory CAD and the printed solid is a voxel reconstruction (see README) — verify critical fits against a real unit.

Version history

  1. v5 Oct 14, 2026 two-piece dock: screw-on nozzle rail that slides and clicks into the X6 sleeve; four nozzle seats in a front row; owner test print approved; earlier rounds v1–v4 were internal

Discussion

0 replies →

Makes

No prints shared yet.

I printed this

Questions and fit reports live in the forum thread.