Upright Stand
UPS01Small desk stand for the BLOWZER X6: the X6 stands upright in a sleeve on your own USB-C cable, which clicks into a lock under it.
- Fits
- BLOWZER X6 (TF-BZX6)
- Version
- 4
- Credit
- Designed by BLOWZER
Test status
Tested by BLOWZER
Printed and tested by the BLOWZER team on a Bambu Lab X2D in PLA (Oct 2026).
Digital DIY files. Printed parts are not included in the retail BLOWZER box; you print and use them at your own discretion.
Model files
All model files (4.2 MB)-
Upright stand
stl UPS01-v4-upright-stand.stl 846 KB | Oct 17, 2026
How to use it
A small desk home for the BLOWZER X6 that keeps it standing upright and charging. The X6 drops grip-down into the sleeve and lands on your own USB-C plug, which sits clicked into a lock under the sleeve, so it charges the moment it is set down. The stand has no nozzle seats: the nozzle you use stays on the X6. Feed the plug up through the opening under the base, slide it along until it clicks, then press the cord into any of the four grooves so it leaves the stand front, back, left or right. v4 is the version the owner printed and approved: it reuses the cable lock of the approved Under-Desk Slide Dock with the plug loading from below, on a 110 × 80 mm base with no screws or glue.
Print settings
- Material
- PLA (team test print, white)
- Supports
- none
- Layer height
- 0.2
- Infill
- 50 %
- Size (as printed)
- 110 × 80 × 70 mm
Your printer's ready-made 3MF file has all of this.
More details
- Print orientation
- base down, as saved
- Walls
- 4
- Nozzle
- 0.4
- Scale
- 100 % — do not scale, the sleeve and the cable lock stop fitting
- Extra hardware
- Your own USB-C charging cable (not included)
- Assembly
- One part, no hardware. Plug in from below, click, route the cord into a groove, drop the X6 in.
- Filament
- 133 g PLA
- Notes
- Team test print on a Bambu Lab X2D, 0.4 mm nozzle, white PLA, base down, no supports, no brim: 3 h 30 min, 133 g. The X2D project file (3MF) carries these exact settings. Bambu Studio may show a non-critical "floating cantilever" note for the two small click teeth inside the cable lock; they print fine in PLA.
Licence
Free for personal and commercial accessories, not for copying the product.
Full licence text
BLOWZER X6 Reference Model Licence (v1.1, 2026-10-02) Copyright (c) 2026 Sabrent. "BLOWZER" and "SABRENT" are trademarks of their owners. You may, free of charge, for personal AND commercial purposes: 1. Use, copy, measure and modify these reference files to design, test, make and SELL accessories, mounts, docks, holders, cases, adapters and similar add-ons that fit or work with the BLOWZER X6. 2. Include these files, unchanged or modified, in the published source of such an accessory, with this notice. You may NOT: 3. Use these files to reproduce, manufacture or sell the BLOWZER X6 product itself or a product that copies its housing, or imply that your accessory is made or endorsed by Sabrent. 4. Remove the BLOWZER / SABRENT marks from the model and present the result as a different product. The files are provided "as is", without warranty of any kind. Dimensions are taken from the factory CAD and the printed solid is a voxel reconstruction (see README) — verify critical fits against a real unit.
Version history
- v4 Oct 17, 2026 first public version of the new stand: the cable lock of the Under-Desk Slide Dock, plug loads from below, four cable grooves; owner test print in white PLA on a Bambu Lab X2D; v1–v3 were internal
- v1 Sep 17, 2026 built as the stable alternative to the 20° tilt stand (tip-over 23–26° vs 9–11°)
- v2 Sep 17, 2026 recessed BLOWzer X6 wordmark on both collar sides
Discussion
0 replies →Makes
No prints shared yet.
Questions and fit reports live in the forum thread.