In 3D
Wall Mount
Screw-on wall holster: grip pocket plus a flat barrel rest, charges on the wall.
- Fits
- BLOWZER X6 (TF-BZX6)
- Version
- 3
- Credit
- Designed by BLOWZER
Test status
Fit-checked digitally
Fit check against the product CAD in Blender: 0 interfering vertices, 0.6 mm grip clearance, pad 0.77 mm off the barrel flat. Not test-printed as far as the record shows.
Downloads
blowzer-x6-wall-mount-v3.stl STL — mesh, ready to slice · 134 KB blowzer-x6-wall-mount-v3.step STEP — CAD, for designing · 1.1 MBDigital DIY files. Printed parts are not included in the retail BLOWZER box; you print and use them at your own discretion.
How to use it
A holster for a wall or the side of a cabinet. The X6 stands upright, grip in the pocket, barrel resting on a flat pad; lift 30 mm to take it out. Two keyhole slots 110 mm apart take #8 / 4 mm screws. The USB-C slot through the pocket floor lets the cable hang straight down so it charges on the wall.
Print settings
- Print orientation
- back plate (wall side) on the bed
- Material
- PLA
- Supports
- none
- Layer height
- 0.2 mm
- Nozzle
- 0.4 mm
- Walls
- 3
- Infill
- 25–30 %
- Scale
- 100 % — do not scale, the grip pocket stops fitting
- Extra hardware
- 2 × #8 (4 mm) wall screws
- Size (as printed)
- 80 × 161 × 46.85 mm
- Filament
- ≈ 73 g PLA at 30 % infill
- Assembly
- Not specified
- Notes
- Keyholes Ø9 head / 4.5 × 9 slot at 110 mm spacing.
Reuse terms
BLOWZER X6 Reference Model Licence (v1.1, 2026-10-02) Copyright (c) 2026 Sabrent. "BLOWZER" and "SABRENT" are trademarks of their owners. You may, free of charge, for personal AND commercial purposes: 1. Use, copy, measure and modify these reference files to design, test, make and SELL accessories, mounts, docks, holders, cases, adapters and similar add-ons that fit or work with the BLOWZER X6. 2. Include these files, unchanged or modified, in the published source of such an accessory, with this notice. You may NOT: 3. Use these files to reproduce, manufacture or sell the BLOWZER X6 product itself or a product that copies its housing, or imply that your accessory is made or endorsed by Sabrent. 4. Remove the BLOWZER / SABRENT marks from the model and present the result as a different product. The files are provided "as is", without warranty of any kind. Dimensions are taken from the factory CAD and the printed solid is a voxel reconstruction (see README) — verify critical fits against a real unit.
Version history
- v3 Sep 17, 2026 recessed BLOWzer X6 wordmark on the pocket front
- v2 Sep 17, 2026 flat barrel rest pad on the barrel's side flat, 0.77 mm off; 0 interfering vertices
- v1 Sep 16, 2026 first build — cylindrical barrel saddle interfered with the barrel (3,105 vertices penetrated up to 0.7 mm)
Discussion
0 replies · 0 printed →Questions, fit reports and print logs live in the forum thread. Printed it? Post an "I printed this" reply there.