Compact Garage Drawer Bin is in the MODS library, ready to print — STL, STEP and the renders are on its page.
Test-printed drawer bin that stores the BLOWZER X6 and all five nozzles in one 150 × 168 mm tray, with no empty space.
Printing: base down on the plate, as saved; supports: none; PETG HF (what the test print used).
Assembly: One part, no hardware. Set it on the drawer floor, take the nozzle off the X6, lay the X6 in its cradle and the nozzles in their slots.
Free under the community pack licence (personal and commercial accessories; never for reproducing the product) — full text on the page.
Models in this post
Test-printed drawer bin that stores the BLOWZER X6 and all five nozzles in one 150 × 168 mm tray, with no empty space.
