Compact Mount with Nozzles is in the MODS library, ready to print — STL, STEP and the renders are on its page.
Compact wall dock: the BLOWZER X6 hangs in a holster in the middle, the four spare nozzles twist-lock flush on each side, the charging cable parks in the holster.
Printing: standing on its bottom edge, plate upright, exactly as the STL is saved (Z = 0 at the bottom edge); supports: none — each nozzle throat has a 0.4 mm roof relief and the keyhole counterbores open downward; PETG — the two sprung tongues in the holster need its flexibility.
Assembly: Hang the plate on two pan-head screws (keyholes 120 mm apart, inside the two upper seats); hang the X6 grip-down in the holster with the cable parked in the holster floor; lock each spare nozzle with a quarter turn clockwise.
Honest note: CAD-verified, not printed by us yet — print one and reply with Show your print.
Free under the community pack licence (personal and commercial accessories; never for reproducing the product) — full text on the page.
Models in this post
Compact wall dock for the BLOWZER X6, with four twist-lock nozzle seats and a parked USB-C charging cable.