Compact Mount with Nozzles
CMN01Compact wall dock for the BLOWZER X6, with four twist-lock nozzle seats and a parked USB-C charging cable.
- Fits
- BLOWZER X6 (TF-BZX6)
- Version
- 7
- Credit
- Designed by BLOWZER
Test status
Tested by BLOWZER
Printed and tested by the BLOWZER team: the dock clicks in place, the cable dock works and the twist-lock nozzle seats hold (Oct 2026).
Digital DIY files. Printed parts are not included in the retail BLOWZER box; you print and use them at your own discretion.
Model files
All model files (6.5 MB)-
Flush X6 face
stl CMN01-v7-flush-x6face.stl 884 KB | Oct 19, 2026
-
Optional: fit-test piece — Slot and cable park
stl CMN01-v7-test-coupon-slot-and-cable-park.stl 28 KB | Oct 19, 2026
How to use it
A clean wall home for the BLOWZER X6 and its spare nozzles. The X6 drops grip-down into the center holster and lands on the parked USB-C plug, so it can charge while hanging on the wall. Four spare nozzles lock onto the flush side seats: push each nozzle onto the X6-face seat, twist clockwise to the stop, and it stays put until you twist it back. The fifth nozzle can stay on the X6. Two hidden keyholes sit inside the upper seats, so the screw heads stay below the seat floor and away from the X6. v7 is the owner-verified print with the tighter guided dock, spring feel at the end of the drop, flush X6-face nozzle seats, hidden screw heads, and support-free print orientation.
Print settings
- Material
- PETG
- Supports
- none
- Layer height
- 0.2
- Infill
- 20 %
- Size (as printed)
- 172 × 38.5 × 111.3 mm
Your printer's ready-made 3MF file has all of this.
More details
- Print orientation
- standing on its bottom edge, plate upright, exactly as the STL is saved (Z = 0 at the bottom edge)
- Walls
- 3
- Nozzle
- 0.4
- Scale
- 100 % — do not scale, the seats and the holster stop fitting
- Extra hardware
- 2 × pan-head screws, head ≤ Ø9 × 3 mm, #6 / M3.5 shank, plus wall anchors
- Assembly
- Hang the plate on two pan-head screws (keyholes 120 mm apart, inside the two upper seats); hang the X6 grip-down in the holster with the cable parked in the holster floor; lock each spare nozzle with a short clockwise twist until it stops.
- Filament
- about 131 g PETG for the mount
- Notes
- Use a 5 mm brim (outer only). The X2D and A1 project files (3MF) carry these exact settings. Bambu Studio estimates: Bambu Lab X2D, Bambu PETG HF, about 3 h 20 min and 131 g; Bambu Lab A1, generic PETG, about 5 h 20 min and 130 g. The included small coupon (about 1 h 30 min on the X2D, 53 g) is optional for checking your printer's fit on the cable dock before committing to the full wall mount. Mounting: two pan-head screws, head ≤ Ø9 × 3 mm, #6 / M3.5 shank, into wall anchors; the keyholes are 120 mm apart inside the two upper nozzle seats, both at the same height. Mark them with the plate held level, hang the plate, and let it drop so the shanks ride up into the slots.
Licence
Free for personal and commercial accessories, not for copying the product.
Full licence text
BLOWZER X6 Reference Model Licence (v1.1, 2026-10-02) Copyright (c) 2026 Sabrent. "BLOWZER" and "SABRENT" are trademarks of their owners. You may, free of charge, for personal AND commercial purposes: 1. Use, copy, measure and modify these reference files to design, test, make and SELL accessories, mounts, docks, holders, cases, adapters and similar add-ons that fit or work with the BLOWZER X6. 2. Include these files, unchanged or modified, in the published source of such an accessory, with this notice. You may NOT: 3. Use these files to reproduce, manufacture or sell the BLOWZER X6 product itself or a product that copies its housing, or imply that your accessory is made or endorsed by Sabrent. 4. Remove the BLOWZER / SABRENT marks from the model and present the result as a different product. The files are provided "as is", without warranty of any kind. Dimensions are taken from the factory CAD and the printed solid is a voxel reconstruction (see README) — verify critical fits against a real unit.
Version history
- v7 Oct 19, 2026 pack refresh, same printed v7 part: adds Bambu Lab X2D print projects for the mount and the coupon, two cable-park cutaways and a step-by-step guide; owner verification
- v7 Oct 10, 2026 flush X6 face on an 11 mm plate (the X6's own bezel engraved into each seat), 0.4 mm throat roof relief so the mount prints standing with no supports, screw heads counterbored under the seat floors, guide band and two leaf springs in the holster, grip channel up the plate, cable park in the holster floor; earlier rounds v1–v6 were internal
Discussion
0 replies →Makes
No prints shared yet.
Questions and fit reports live in the forum thread.