Nozzle guide: five nozzles, what each one is for

0 replies 0 reactions
Share
Post on X Instagram: copy the link and paste it in your story or bio.
  1. BLOWZER Team author Team · edited #1

    The BLOWZER X6 ships with five interchangeable nozzles. Swap the nozzle to shape the airflow for the job:

    | Nozzle | What it is for | Length beyond the mount face | |---|---|---| | Default (the short flat one, fitted out of the box) | focused, all-round airflow | 33.75 mm | | Flat | a blade of air along tracks, vents and seams | 49.75 mm | | Long | extra reach into deep gaps | 60.33 mm | | Wide | a broader sweep over surfaces | 82.0 mm | | Needle | fine, pinpoint air in the tightest spots | 90.03 mm |

    Every nozzle mounts on the same Ø39.67 mm socket and inserts 5.64 mm into the bezel.

    Designing a nozzle? Post it in Nozzles & attachments with the socket fit and what it is for — and remember the rule that applies to every DIY part: accessories go around the product, never inside it.

Sign in to reply — one email link, no password.