The BLOWZER X6 ships with five interchangeable nozzles. Swap the nozzle to shape the airflow for the job:
| Nozzle | What it is for | Length beyond the mount face | |---|---|---| | Default (the short flat one, fitted out of the box) | focused, all-round airflow | 33.75 mm | | Flat | a blade of air along tracks, vents and seams | 49.75 mm | | Long | extra reach into deep gaps | 60.33 mm | | Wide | a broader sweep over surfaces | 82.0 mm | | Needle | fine, pinpoint air in the tightest spots | 90.03 mm |
Every nozzle mounts on the same Ø39.67 mm socket and inserts 5.64 mm into the bezel. All five are in the reference pack as exact CAD (STEP) and as watertight meshes (STL), mount face at X = 0 and the nozzle pointing to −X, so you can design an adapter or a nozzle of your own against them: https://community.getblowzer.com/mods/reference
Designing a nozzle? Post it in Nozzles & attachments with the socket fit and what it is for — and remember the rule that applies to every DIY part: accessories go around the product, never inside it.
Models in this post
Exact, true-size exterior model of the BLOWZER X6 (no internals) for designing your own accessories.