Wall Charging Holster is in the MODS library, ready to print — STL, STEP and the renders are on its page.
Test-printed compact wall holster for the BLOWZER X6 that charges it while it hangs: your own USB-C cable clicks into a lock in the pocket floor.
Printing: standing on its bottom face, as it hangs and as saved; supports: none; PETG (the lock fingers and leaf springs flex; PLA is not recommended).
Assembly: One part. Two screws 70 mm apart, hang the plate, click the plug in from below, drop the X6 in.
Free under the community pack licence (personal and commercial accessories; never for reproducing the product) — full text on the page.
Models in this post
Compact wall holster for the BLOWZER X6 that charges it while it hangs: your own USB-C cable clicks into a lock in the pocket floor.