Wall Charging Holster
WCH01Compact wall holster for the BLOWZER X6 that charges it while it hangs: your own USB-C cable clicks into a lock in the pocket floor.
- Fits
- BLOWZER X6 (TF-BZX6)
- Version
- 2
- Credit
- Designed by BLOWZER
Test status
Tested by BLOWZER
Printed and tested by the BLOWZER team (Oct 2026).
Digital DIY files. Printed parts are not included in the retail BLOWZER box; you print and use them at your own discretion.
Model files
All model files (6.7 MB)-
Wall charging holster
stl WCH01-v2-wall-charging-holster.stl 1.6 MB | Oct 17, 2026
How to use it
A small wall home for the BLOWZER X6 that keeps it charged. The X6 drops grip-down into the holster and lands on your own USB-C plug, which sits clicked into a lock in the pocket floor, so it charges the moment it is hung up. There are no nozzle seats: the nozzle you use stays on the X6. Two screws 70 mm apart hold the 90 × 106 mm plate; their heads sit sunk in counterbores in the plate, clear of the X6. v2 reuses the pocket, guide band, leaf springs and cable lock of our confirmed Compact Mount, printed in PETG with no supports.
Print settings
- Material
- PETG (the lock fingers and leaf springs flex; PLA is not recommended)
- Supports
- none
- Layer height
- 0.2
- Infill
- 20 %
- Size (as printed)
- 90 × 38.5 × 106.3 mm
Your printer's ready-made 3MF file has all of this.
More details
- Print orientation
- standing on its bottom face, as it hangs and as saved
- Walls
- 3
- Nozzle
- 0.4
- Scale
- 100 % — do not scale, the pocket and the cable lock stop fitting
- Extra hardware
- 2 × pan-head screws, head up to Ø9 × 3 mm, #6 / M3.5–M4 shank, with wall anchors where neededYour own USB-C charging cable (not included)
- Assembly
- One part. Two screws 70 mm apart, hang the plate, click the plug in from below, drop the X6 in.
- Filament
- 78 g PETG
- Notes
- Bambu Lab X2D, 0.4 mm nozzle, Generic PETG, standing, no supports, 5 mm outer brim: 2 h 38 min, 78 g. The X2D project file (3MF) carries these exact settings; Bambu Studio reports no floating regions.
Licence
Free for personal and commercial accessories, not for copying the product.
Full licence text
BLOWZER X6 Reference Model Licence (v1.1, 2026-10-02) Copyright (c) 2026 Sabrent. "BLOWZER" and "SABRENT" are trademarks of their owners. You may, free of charge, for personal AND commercial purposes: 1. Use, copy, measure and modify these reference files to design, test, make and SELL accessories, mounts, docks, holders, cases, adapters and similar add-ons that fit or work with the BLOWZER X6. 2. Include these files, unchanged or modified, in the published source of such an accessory, with this notice. You may NOT: 3. Use these files to reproduce, manufacture or sell the BLOWZER X6 product itself or a product that copies its housing, or imply that your accessory is made or endorsed by Sabrent. 4. Remove the BLOWZER / SABRENT marks from the model and present the result as a different product. The files are provided "as is", without warranty of any kind. Dimensions are taken from the factory CAD and the printed solid is a voxel reconstruction (see README) — verify critical fits against a real unit.
Version history
- v2 Oct 16, 2026 first public version: the confirmed CMN01 v7 pocket, springs and cable lock on a compact 90 × 106 mm plate with counterbored keyholes; X2D PETG project file; v1 was internal
Discussion
0 replies →Makes
No prints shared yet.
Questions and fit reports live in the forum thread.