From the product FAQ. Share your own tips below — say what you cleaned, which mode and which nozzle.
- PC, graphics card, case fans: power the PC off and unplug it, start on Gentle, and hold each fan still while you blow it clean so a spinning fan does not send voltage back to the motherboard. Keep the nozzle a short distance from small components.
- Keyboard: Gentle or Boost; sweep across the keys at an angle; the flat or needle nozzle gets into the rows.
- Camera gear: bodies, lens barrels, bags and accessories on Gentle from a short distance. Never aim it at an exposed image sensor or into an open lens mount.
- Car: after a wash it dries mirrors, grilles, emblems and trim, and clears dust from vents, seats and floor mats.
- Workshop and 3D printer: loose sawdust, shavings and filament bits from benches, tools and printer frames; turn the printer off and let it cool first. Never blow unknown, toxic, metal or combustible dust into the air.
- Pet hair: blows loose hair off hard surfaces, gear, car mats and upholstery seams so you can collect it. Never point it at a pet.
The safety rules
Never point the BLOWZER X6 at people, pets, faces or eyes; never put fingers, hair or objects into the intake or outlet. It is not a toy — store it out of reach of children and pets. Keep it away from liquids (it is not waterproof) and from flammable gases or vapors; keep the intake grille clear of lint and hair; do not bend or pull the charging cable. Outdoors it feeds air to charcoal and campfire embers — never with lighter fluid or other flammable liquids, and from a safe distance.